
Frabicated second Anemometer.
Our first Anemometer was successed.But it was large and Heavy.
Our CEO decided to go for high feet tower. Therefore fabricated
small size Anemometer.Same concept used as first Anemometer but changed
some electroniscs. Sloted Optical switches were used for Wind direction
and Wind speed sensors.These switches was realable than glass reed switches.
Fixed telescopic anttena, covered with plastic sleeve to protect from corrosion.
Fixed externally metal extruded barrel to house the temperature probe Dallas 18B20.
Machine works were done by Slimco Eng.Designing and all Electronics works were done by Dan_Micros.
Second Wireless Anemometer.
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.

Anemometer being tested at work shop
Cubes fixed to Top and bottom of the cylinder were solid aluminium.
All metal parts were stainless steel except cylider.Cylinder was machined cast Iorn.
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.

Device in Operation
After few months of operation.Cylinder started to get corrosion.
Rain water and moisture deposited the edge of top, bottom solid aluminium.
This speed up corrosion.
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.

Another View of the Anemometer
Wind vane shaft started to get corrosion.
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.

Solar power generator
Solar panel attached to metal encloser. SLA Battery and charge controller
equipped Inside the metal encloser.
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.

Another View of the Anemometer
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.

Distant View of the Anemometer
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.

Attractive Misty Environment
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.

Misty environment
Anemometer Installed by Slimco Eng. staff.
Location is at Hulankanda Temple , Matara.